Solar Equipment Specifications


List of all products and specifications included during Enviro-Shelter 2013 Experiment









5 - High Efficiency Mono-crystalline Photovoltaic Module

Supplier -  GRAPE SOLAR 250W MONO

• High efficiency solar cells (approx. 18%) with quality silicon material for high module conversion efficiency and long term output stability and reliability.

• Rigorous quality control to meet the highest international standards.

• High transmittance, low iron tempered glass with enhanced stiffness and impact resistance.

• Unique frame design with strong mechanical strength for greater than 50 lbs/ft2 wind load and snow load withstanding and easy installation.

• Advanced encapsulation material with multilayer sheet lamination to provide long-life and enhanced cell performance.

• Outstanding electrical performance under high temperature and weak light environments.



Use the link below for Factory Specs

Grape Solar

 

TS-60 TriStar 60 Charge Controller, 12/24/48V 60 Amps

  • The controller is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. This controller operates in only one of these modes at a time but two or more controllers may be used to provide multiple functions.
  • Uses advanced technology and automated production to provide exciting new features at a competitive cost
  • The controller is UL listed and is designed for both solar home systems and professional applications

The digital meter option displays self-test results, system information and controller setpoints. Remote temperature sensor option rated from -30° C (-22° F) to +80° C (+176° F). White power-coated steel, indoor rated, vertical mounting enclosure.


Use the link below for Factory Specs


Charge Controller

 
 
 
 
2000 / 4000 Watt Power InverterSA Series 2000 24V by Samlex 
 
 
 
  • 2000  watts continuous power output
  • 4000 watts surge (peak power)
  • True sine wave output (THD <3%)
  • 24 volts DC input
  • Isolated input and output
  • Power saving mode to conserve energy
  • Load controlled cooling fan
  • AC hardwire capable
  • Power on/off remote control capable, Models S-R6-12 or S-R8
  • Advanced microprocessor design
  • Tri-color indicators display input, output level and failure status
  • Two year warranty


  • Use the link below for Factory Specs


    Samlex Inverter










         M-Series (Mini) 300 Amp Battery Switches

    *Ignition protected safe for installation aboard gasoline powered boats
  • Case design allows surface, front panel, or rear panel mounting
  • Isolating cover with snap-on sections protects rear contacts



  • Use the link below for Factory Specs

    300 Amp DC Switch






    Samlex 24 Volt to 12 Volt DC Converter


    Samlex SDC-15 DC to DC converter, 24 volts DC to 12 volts DC.

    This is used where you have a 24 volt DC battery system but need to run equipment, such as DC lights, that require 12 volts DC. This avoids "tapping" a 24 volt battery system which can lead to uneven battery charging and early battery failure due to unbalanced charging.

    Input 20-30 Volts DC, output 13.8 volts DC @ 15 Amps peak (12 Amps Continuous).



    Use the link below for Factory Specs


    12 to 24 DC Volt Converter







    Autocraft Top Post Terminal Battery Cable, 78 inches (Red) and (Black)


    *  Solidium™ weld system features a high-grain top alloy and strong               inter-cell weld to virtually eliminate corrosion  

  • Vent caps reduce leakage and corrosion for increased safety

  • Circatech™ rounded corners on negative plates eliminate separator                shorts

  • Ultrasafe side terminals reduce chance of overtorque and weld                damage

  • Corrosion-resistant terminals; 100% copper conductor; flexible PVC               insulation

  •  
    Color: Red or Black
    Length: 78 in
    Material: Copper
    Post Design: Top Post
    Ring Terminals Both Ends:  No
    Terminal #1 Type: Top
    Terminal #2 Type: Eyelet
    Wire Size: 4 ga
    With Extra Leads: No

     







    Bussmann Fuse Link Pack - 80 Amps

    Handy pack of one 80 amp FLD bolt-mount fusible link for 9/16" bolt terminals


     
    Hampton Bay  LED Powered Lantern
     
     
     
    Woodmere outdoor lanterns are specially designed with a low wattage LED light source that produces the same light as a regular bulb using a fraction of the electricity, and the LEDs never need replacing. This is modern technology in a simple, classic design that complements the exterior décor of any home. It features an Oil Rubbed Bronze finish and clear glass shade. The sturdy, weather resistant construction and waterproof seal protects the lantern from harsh outdoor elements to ensure the long life of the fixture. These outdoor lanterns install easily, are maintenance free, and deliver welcoming, safe and reliable exterior lighting for less cost.

    LED Exterior Lights Specs


     
    The Lithonia Lighting Wall-Mount 2-Light Outdoor Mini Floodlight
     
     
     
    The Lithonia Lighting Wall-Mount 2-Light Outdoor Mini Floodlight is constructed of weather-resistant injection-molded plastic with a bronze finish. Its compact size and 1/2 in. threaded knuckle allow for discreet wall mounting directly to a junction box. This light is perfect for illuminating driveways, decks and yards. 2 energy-efficient 13-watt CFL bulbs, equal to 120 watts of incandescent output, are included 
     
     
     
     
     
     
     
     
    The EcoSmart 23-Watt (100W) Dimmable Soft White Light
     
     
    The EcoSmart 23-Watt (100W) Dimmable Soft White CFL Light Bulb (E)* helps you create the perfect light level in your indoor space. Ideal for use in table lamps, sconces and other dimming lighting applications, the bulb provides a warm, full glow similar to that cast by an incandescent bulb. This durable bulb lasts up to 13 times longer than its 100-watt incandescent equivalent. (E)* means this bulb meets Federal minimum efficiency standards.      
     
    EcoSmart Bulb Specs              
     
     
     
     
     
     
    Grape Solar GS-S-150-Fab36 150-Watt Monocrystalline PV Solar Panel
     
     
     
     
    The Grape Solar 150-Watt Monocrystalline PV Solar Panel uses high efficiency solar cells (aprox. 19%) made from quality silicon material for high module conversion efficiency and long term output stability and reliability. Virtually maintenance free. High transmittance, low iron tempered glass for durability and enhanced impact resistance.
    • Positive and negative leads equipped with tyco connectors
    • High efficiency solar cells (approx.19 percent) with quality silicon material for high module conversion efficiency and long term output stability and reliability
    • Rigorous quality control to meet the highest international standards
    • High transmittance, low iron tempered glass with enhanced stiffness and impact resistance
    • Unique frame design with strong mechanical strength for easy installation
    • Advanced encapsulation material with multilayer sheet lamination to provide long-life and enhanced cell performance
    • Outstanding electrical performance under high temperature and weak light environments
    • Works for both on-grid or off-grid solar power staions

    Grape-Solar-GS-S-150


     

     

    No comments:

    Post a Comment